Selection · Alternatives · Packages · BOM
Electronic component sourcing guides
Start with the device type, verify the footprint and circuit conditions, then turn the BOM into a quotation that can actually be checked and sourced.
- 1Know the part number
Open the part page and review the alternative checklist.
- 2Know only the category
Choose a sourcing or cross-reference guide below.
- 3Have a BOM
Check packaging, quantities, lead time and substitution rules.
01
Part-specific alternative checks
Pin compatibility is only the first filter.
Compare the circuit, firmware, package and production conditions before changing a BOM.
- Model cross-checkSTM32F103C8T6 alternatives: what to verify before changing the BOMHow to evaluate STM32F103C8T6 alternatives: footprint alone is not enough. Check Flash wait states, ADC, USB, Read the checklist
- Model cross-checkESP32-WROOM-32E alternatives: antenna and Flash come firstHow to compare ESP32-WROOM-32E alternatives: PCB or external antenna, Flash, module size, pinout, firmware parRead the checklist
- Model cross-checkMAX485ESA alternatives: verify supply, logic and bus conditionsHow to compare MAX485ESA alternatives: supply and logic levels, data rate, bus loading, fail-safe thresholds, Read the checklist
- Model cross-checkDS18B20 alternatives: protocol and cable conditions come firstHow to compare DS18B20 alternatives: 1-Wire protocol, pull-up, parasitic power, cable capacitance, resolution Read the checklist
- Model cross-checkSS14 alternatives: a larger current rating is not always betterHow to compare SS14 alternatives: reverse voltage, surge, forward drop, reverse leakage, capacitance, thermal Read the checklist
- Model cross-checkAO3401 alternatives: check the real gate voltage firstHow to compare AO3401 alternatives: actual VGS, RDS(on), voltage rating, gate charge, avalanche and SOT-23 theRead the checklist
02
Sourcing process guides
Reduce avoidable risk before payment and production.
Supplier checks, EOL handling, cross-reference evidence and low-volume ordering.
- Supplier checksSourcing electronic components from ChinaSupplier, documentation and incoming-goods checks before payment.Read the guide
- EOLObsolete and hard-to-find partsPCN review, date codes, packaging, testing and last-time-buy planning.Read the guide
- Cross-referenceCross-reference and alternative partsWhat pin compatibility proves, what it does not, and which tests remain.Read the guide
- Low MOQLow MOQ and sample ordersCut tape, partial reels, samples and small production runs.Read the guide
Need a cross-check?
Send the BOM with quantities, gate-drive or bus conditions, and target lead time.