Diodes & Transistors Rectifier Diodes · MDD

1N4001 · Rectifier Diode 50V 1A

1N4001 (Rectifier Diode 50V 1A from MDD) comes in a DO-41 package. Reference unit price: US$0.017, minimum order 1 piece. Availability: In stock. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

1N4001 Rectifier Diode 50V 1A
Part number1N4001
ManufacturerMDD
DescriptionRectifier Diode 50V 1A
PackageDO-41
CategoryDiodes & Transistors / Rectifier Diodes
Reference priceUS$0.017
Min. order1 pcs
AvailabilityIn stock
Reference stock1,031 pcs

1N4001 price and stock (reference)

QuantityReference unit priceLead time
1 pcs and upUS$0.017In stock
200 pcs and upUS$0.013In stock
2000 pcs and upUS$0.012In stock

1N4001 specifications

Reverse Voltage Rating50V
Forward Current1A
RoHSCompliant

About the Rectifier Diode 50V 1A

1N4001 is MDD's Rectifier Diode 50V 1A, DO-41 package. It is a rectifier used on the secondary of a transformer or as a polarity and freewheel diode in a low-frequency supply. Match the current and reverse-voltage ratings, and remember recovery time: a standard rectifier is too slow for a switching secondary. Held in stock in Shenzhen; batch and lead time are confirmed on inquiry.

Replacement checks:
  • Confirm whether the circuit is low-frequency rectification or a high-frequency switching path. 1N4001 is a standard-recovery rectifier and its recovery loss can become significant at high switching frequency.
  • Check peak reverse voltage, average forward current, inrush current and fuse coordination. The 50 V/1 A rating does not guarantee every thermal or surge condition.
  • The banded end of a DO-41 is the cathode. Verify polarity and body length during assembly or substitution rather than choosing a higher-numbered part by habit.
Direct answer: 1N4001 is a 50 V, 1 A axial rectifier diode from MDD in a DO-41 package. It is intended for 50/60 Hz rectification, low-frequency reverse-polarity protection and general freewheeling. It is a standard-recovery rectifier, not a fast-recovery or Schottky diode. Before using it in a high-frequency switching converter, high-efficiency low-voltage path or fast freewheel circuit, verify reverse-recovery loss, forward drop and temperature rise. Reviewed 2026-11-20

1N4001 — frequently asked questions

Can 1N4001 be used for switching-supply output rectification?

It should not be assumed suitable. This is a standard-recovery rectifier. A switching output normally requires recovery-loss, forward-drop and thermal checks, and may need a Schottky or fast-recovery diode.

Can 1N4001 be replaced by 1N4007?

Both are 1 A axial rectifiers, and 1N4007 has a higher reverse rating. Still verify package, surge, thermal margin and circuit voltage before substitution; a higher voltage rating alone is not a complete check.

How are the diode terminals identified?

The banded end of a DO-41 body is normally the cathode. Confirm the datasheet, PCB marking and measured orientation before assembly rather than relying on visual position alone.

Related Rectifier Diodes parts

Need 1N4001?

Genuine parts · small-batch trial runs · full BOM kitting

How to order 1N4001

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.