Resistors Resistor Networks · YAGEO

YC122-JR-0710KL · 2-Element 10 kΩ Resistor Network

YC122-JR-0710KL packs two 10 kΩ resistors into a four-pin 0402x2 network. The electrical values are not enough on their own: confirm whether the internal elements are independent or share a common node, then verify the pin map, per-element power, tolerance and PCB land pattern.

YC122-JR-0710KL 2-Element 10 kΩ Resistor Network
Part numberYC122-JR-0710KL
ManufacturerYAGEO
Description2-Element 10 kΩ Resistor Network
Package0402x2
CategoryResistors / Resistor Networks
Reference priceUS$0.0073
Min. order100 pcs
AvailabilityIn stock
Reference stock429 pcs

YC122-JR-0710KL price and stock (reference)

QuantityReference unit priceLead time
1 pcs and upUS$0.0073In stock
10 pcs and upUS$0.0058In stock
30 pcs and upUS$0.0049In stock
200 pcs and upUS$0.0044In stock
400 pcs and upUS$0.0039In stock
1000 pcs and upUS$0.0037In stock

YC122-JR-0710KL specifications

Number of Resistors2
Tolerance±5%
Resistance10kΩ
Power(Watts)62.5mW
Temperature Coefficient±200ppm/℃
Number of Pins4

About the 2-Element 10 kΩ Resistor Network

YC122-JR-0710KL is YAGEO's Resistor Network 10kΩ ±5% ±200ppm/℃ 0402x2. It packs several matched resistors into one package, usually as pull-ups on a data bus or as series resistors on a group of parallel signals. The circuit type matters as much as the value - isolated, bussed and R-2R networks are not interchangeable. Check the element count, pin-out and tolerance. Held in stock in Shenzhen; batch and lead time are confirmed on inquiry.

Replacement checks:
  • Identify whether the network contains independent resistors, a common-node circuit or another topology; do not compare 10 kΩ alone.
  • Map all four pins to the internal elements and avoid replacing a common-node network with isolated resistors or vice versa.
  • Check actual dissipation against 62.5 mW per element, along with temperature rise, ±5% tolerance and ±200 ppm/°C drift.
  • Verify the 0402x2 land pattern, terminal spacing, placement orientation and reflow conditions.
Direct answer: YC122-JR-0710KL is a YAGEO resistor network listed with two 10 kΩ elements, four pins, ±5% tolerance, ±200 ppm/°C and 62.5 mW per element in a 0402x2 package. Before replacement, confirm whether the two elements are independent or share a common node, then verify pin mapping, land pattern, power derating and tolerance. Reviewed 2026-11-20

YC122-JR-0710KL — frequently asked questions

Are the two 10 kΩ elements independent?

The listing confirms two elements, four pins and the resistance, but the exact internal topology and pin mapping must still be checked against the manufacturer data.

How much power can each element dissipate?

The listing gives 62.5 mW per element. Derate for ambient temperature, adjacent parts, copper area and continuous operation.

Can one ordinary 10 kΩ chip resistor replace it?

Not directly. A four-pin network may implement grouped pull-ups or matching, so the internal circuit and every pin connection must be confirmed first.

Related Resistor Networks parts

Need YC122-JR-0710KL?

Genuine parts · small-batch trial runs · full BOM kitting

How to order YC122-JR-0710KL

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (100 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.