ICs Interface & Driver ICs · MaxLinear

SP3485EN · RS-485 transceiver 3.3V

SP3485EN (RS-485 transceiver 3.3V from MaxLinear) comes in a SOIC-8 package. Reference unit price: US$0.217, minimum order 1 piece. Availability: In stock. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

SP3485EN RS-485 transceiver 3.3V
Part numberSP3485EN
ManufacturerMaxLinear
DescriptionRS-485 transceiver 3.3V
PackageSOIC-8
CategoryICs / Interface & Driver ICs
Reference priceUS$0.217
Min. order1 pcs
AvailabilityIn stock
Reference stock1,022 pcs

SP3485EN price and stock (reference)

QuantityReference unit priceLead time
1 pcs and upUS$0.217In stock
100 pcs and upUS$0.140In stock
1000 pcs and upUS$0.113In stock

SP3485EN specifications

Power Supply3.3V
InterfacesRS-485
RoHSCompliant

About the RS-485 transceiver 3.3V

SP3485EN is MaxLinear's RS-485 transceiver 3.3V, SOIC-8 package. It converts between a controller and a bus or line - level shifting, driving a differential pair, or acting as the physical layer for a serial port. Confirm the bus standard, data rate and supply, and whether the part is a driver, a receiver or a transceiver - the three are not drop-in equivalents. Held in stock in Shenzhen; batch and lead time are confirmed on inquiry.

Replacement checks:
  • Check the controller UART levels and the 3.3 V supply first; do not place it in a 5 V logic system based only on pin compatibility.
  • Verify termination, fail-safe bias, cable length and common-mode range together. Replacing the transceiver will not solve a bus topology problem.
  • An SOIC-8 outline does not prove equivalent protection, data-rate grade or pin definition. Compare the complete ordering code and datasheet before substitution.
Direct answer: SP3485EN is a 3.3 V RS-485 transceiver from MaxLinear in an SOIC-8 package. It connects a 3.3 V controller UART to a differential RS-485 bus. The device handles interface levels and differential drive, but it does not provide bus isolation by itself. Before ordering, verify the supported data rate, bus common-mode range, termination and bias, DE/RE timing, and whether the system needs galvanic isolation or external TVS protection. Reviewed 2026-11-20

SP3485EN — frequently asked questions

Can SP3485EN connect directly to a 5 V MCU?

Do not assume that. Its listed supply is 3.3 V. Check MCU pin levels, RO output high level, DI/DE/RE input thresholds, and whether the remote bus needs level shifting or protection.

Is SP3485EN an isolated RS-485 transceiver?

The listed site data identifies a 3.3 V RS-485 transceiver; it does not establish an isolated supply or isolation barrier. An isolated design needs a digital isolator or isolated power stage and a separate insulation review.

What should be checked when an RS-485 bus is unreliable?

Check A/B polarity, termination and bias, common-mode voltage, ground potential differences, cable stubs and DE timing before changing the transceiver. Confirm the selected data rate and bus loading as well.

Related Interface & Driver ICs parts

Need SP3485EN?

Genuine parts · small-batch trial runs · full BOM kitting

How to order SP3485EN

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.