CH340G · USB USB-to-serial chip through-hole
CH340G (USB USB-to-serial chip through-hole from WCH) comes in a SOP-16 package. Reference unit price: US$0.443, minimum order 1 piece. Availability: In stock. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

| Part number | CH340G |
| Manufacturer | WCH |
| Description | USB USB-to-serial chip through-hole |
| Package | SOP-16 |
| Category | ICs / Interface & Driver ICs |
| Reference price | US$0.443 |
| Min. order | 1 pcs |
| Availability | In stock |
| Reference stock | 6,820 pcs |
CH340G price and stock (reference)
| Quantity | Reference unit price | Lead time |
|---|---|---|
| 1 pcs and up | US$0.443 | In stock |
| 10 pcs and up | US$0.369 | In stock |
| 50 pcs and up | US$0.318 | In stock |
| 100 pcs and up | US$0.276 | In stock |
| 500 pcs and up | US$0.261 | In stock |
| 1000 pcs and up | US$0.253 | In stock |
CH340G specifications
| Interfaces | USB 2.0 |
| Baud Rate | 2Mbps |
| RoHS | Compliant |
About the USB USB-to-serial chip through-hole
CH340G from WCH is a USB-to-serial bridge in a through-hole SOP-16 package - it turns a PC USB port into one TTL serial port, and it is the part most Chinese development and industrial boards use for programming and debug. The attraction is how little it needs around it: the chip plus a 12 MHz crystal and a few capacitors is a complete circuit, with drivers already available for Windows, macOS, Linux and Android, so you never touch the USB stack. Three practical points. The crystal is not optional and not interchangeable - it must be 12 MHz with matched load capacitors, otherwise the host fails to enumerate the device or the link drops intermittently. The supply sets the I/O level: with VCC at 5 V the pins are 5 V, so when you connect to a 3.3 V board such as an STM32, either run the CH340G at 3.3 V or put a series resistor on TXD rather than feeding 5 V into the target's RX. And marking codes vary between batches and clones, so original reel packaging saves a lot of rework. The related CH340C (internal oscillator) and CH340N (SOP-8) differ in package and external parts - check the pin-out before substituting. Held in stock in Shenzhen; full reels or loose parts, batch confirmed on inquiry.
- The page lists both a through-hole description and SOP-16. Confirm the actual mounting type with the supplier or manufacturer data before checking the footprint, pin order and pin-1 orientation.
- USB 2.0 and 2 Mbps are interface and rate fields only. A replacement also needs supply range, I/O levels, the external 12 MHz crystal and load-capacitance conditions checked.
- Verify driver compatibility on the actual operating system. Chips with similar names, or parts from different lots and packages, are not interchangeable on the USB-to-serial label alone.
CH340G — frequently asked questions
Reference availability: 6,820 pcs, In stock. Stock and lead time are confirmed on inquiry — please contact our sales team for the latest status before ordering.
Reference unit price is US$0.443, minimum order 1 piece. Tiered pricing: 1 pcs and up: US$0.443, 10 pcs and up: US$0.369, 50 pcs and up: US$0.318, 100 pcs and up: US$0.276, 500 pcs and up: US$0.261, 1000 pcs and up: US$0.253. Send us your required quantity for a firm quotation.
CH340G is manufactured by WCH in a SOP-16 package, filed under ICs / Interface & Driver ICs. CH340G from WCH is a USB-to-serial bridge in a through-hole SOP-16 package - it turns a PC USB port into one TTL serial port, and it is the part most Chinese development and industrial boards use for programming and debug. The attraction is how little it needs around it: the chip plus a 12 MHz crystal and a few capacitors is a complete circuit, with drivers already available for Windows, macOS, Linux and Android, so you never touch the USB stack. Three practical points. The crystal is not optional and not interchangeable - it must be 12 MHz with matched load capacitors, otherwise the host fails to enumerate the device or the link drops intermittently. The supply sets the I/O level: with VCC at 5 V the pins are 5 V, so when you connect to a 3.3 V board such as an STM32, either run the CH340G at 3.3 V or put a series resistor on TXD rather than feeding 5 V into the target's RX. And marking codes vary between batches and clones, so original reel packaging saves a lot of rework. The related CH340C (internal oscillator) and CH340N (SOP-8) differ in package and external parts - check the pin-out before substituting. Held in stock in Shenzhen; full reels or loose parts, batch confirmed on inquiry.
The minimum order quantity for CH340G is 1 pcs. We support small-batch trial runs as well as volume kitting, and can supply full reels, cut tape or loose parts.
Yes. Send us the original part number or the key parameters (Interfaces, Baud Rate, RoHS) and we will come back with pin-compatible alternatives and a quotation.
Call or WeChat +86 191 2521 1182, email 19125211182@163.com, or upload your BOM on our BOM sourcing page. We normally respond within two working hours, and a formal full-BOM quotation is normally issued within 24 hours.
Yes. We are based in Huaqiangbei, Shenzhen and ship worldwide by express courier. Tell us your destination and we will quote shipping with the parts.
Related Interface & Driver ICs parts
Genuine parts · small-batch trial runs · full BOM kitting
How to order CH340G
Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.