Modules & Dev Boards Function Modules · Monolithic

MPM54304GMN-0004 · Quad-Output Step-Down Power Module, 3 A/3 A/2 A/2 A

MPM54304GMN-0004 is a four-output adjustable buck power module with channel ratings of 3 A, 3 A, 2 A and 2 A, a 5.4 V maximum output and 500 kHz-1.6 MHz switching. The input-voltage record is incomplete at 4 V. Confirm the full input window, output configuration, startup sequence, simultaneous-load margin and complete module thermal design before production.

MPM54304GMN-0004 Quad-Output Step-Down Power Module, 3 A/3 A/2 A/2 A
Part numberMPM54304GMN-0004
ManufacturerMonolithic
DescriptionQuad-Output Step-Down Power Module, 3 A/3 A/2 A/2 A
Package33-PowerFLGA Module
CategoryModules & Dev Boards / Function Modules
Reference priceRequest quote
Min. order1 pcs
AvailabilityConfirm on inquiry
Reference stock0 pcs

MPM54304GMN-0004 price and stock (reference)

This part is a backorder item: price and lead time are confirmed per order. Send us an RFQ and sales will reply with unit price, lead time, MOQ and in-stock alternatives.

MPM54304GMN-0004 specifications

FunctionStep-Down
Output TypePositive
TopologyBuck
OutputAdjustable
Number of Outputs4
Input Voltage4V
Voltage - Output (Max)5.4V
Output Current3A, 3A, 2A, 2A
Frequency - Switching500kHz ~ 1.6MHz

About the Quad-Output Step-Down Power Module, 3 A/3 A/2 A/2 A

MPM54304GMN-0004 is a four-output step-down power module from Monolithic Power Systems. The listing gives buck topology, four adjustable outputs, per-channel currents of 3 A, 3 A, 2 A and 2 A, a 5.4 V maximum output and 500 kHz to 1.6 MHz switching, in a 33-PowerFLGA package. The input-voltage field contains only 4 V and does not state the complete input window, so 4 V must not be treated as the only or maximum input, nor as proof that any rail above 4 V is acceptable. The channel currents must not be added into an unconditional 10 A total. Simultaneous loading, total loss, input rail, ambient, airflow and PCB copper must be evaluated together.

Replacement checks:
  • Obtain the complete input window, transient ceiling and undervoltage behaviour from the manufacturer datasheet; the 4 V page entry is incomplete and cannot establish compatibility.
  • Confirm how all four outputs are set, their startup and shutdown order, enable logic and fault response against the system power sequence and loads.
  • Evaluate total loss, input-rail current and simultaneous-load margin across 3 A/3 A/2 A/2 A combinations; do not simply add the channels.
  • Check 33-PowerFLGA pads, vias, copper, airflow and EMI layout, then verify ripple, efficiency, temperature rise and short-circuit behaviour in the actual board.
Direct answer: MPM54304GMN-0004 is a four-output adjustable buck module rated at 3 A, 3 A, 2 A and 2 A per channel, with a 5.4 V maximum output and 500 kHz-1.6 MHz switching. The 4 V input entry is not the complete input range, and the channel ratings do not form an unconditional 10 A total. Check input limits, output setting, simultaneous loading, sequencing and total loss. Reviewed 2026-11-20

MPM54304GMN-0004 — frequently asked questions

Is 4 V the only input voltage for MPM54304GMN-0004?

That cannot be concluded. Only 4 V is recorded on the page and the complete input window is missing. Obtain the manufacturer datasheet rather than treating the single value as a maximum or only input.

Can 3 A, 3 A, 2 A and 2 A be added to obtain 10 A?

Not unconditionally. Total loss, input rail, simultaneous loading, ambient, airflow and PCB heat spreading all constrain the usable combination.

Can another four-output buck module with the same package replace it directly?

No. Compare input range, output setting, pinout, switching frequency, sequencing, protection, external parts, thermal design and EMI.

Related Function Modules parts

Need MPM54304GMN-0004?

Genuine parts · small-batch trial runs · full BOM kitting

How to order MPM54304GMN-0004

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.