Modules & Dev Boards Function Modules · Domestic

RELAY-1CH-5V · Single-Channel Relay Module optocoupler isolation

RELAY-1CH-5V (Single-Channel Relay Module optocoupler isolation from Domestic) comes in a Module 43×26mm package. Reference unit price: Request quote, minimum order 1 piece. Availability: Confirm on inquiry. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

RELAY-1CH-5V Single-Channel Relay Module optocoupler isolation
Part numberRELAY-1CH-5V
ManufacturerDomestic
DescriptionSingle-Channel Relay Module optocoupler isolation
PackageModule 43×26mm
CategoryModules & Dev Boards / Function Modules
Reference priceRequest quote
Min. order1 pcs
AvailabilityConfirm on inquiry
Reference stock0 pcs

RELAY-1CH-5V price and stock (reference)

This part is a backorder item: price and lead time are confirmed per order. Send us an RFQ and sales will reply with unit price, lead time, MOQ and in-stock alternatives.

RELAY-1CH-5V specifications

Channel1
Contact Rating10A
RoHSCompliant

About the Single-Channel Relay Module optocoupler isolation

RELAY-1CH-5V is a single-channel optocoupler-isolated relay module: 5 V coil, 10 A rated contacts, 43x26 mm board, used to let an MCU or a Raspberry Pi switch a mains load such as a lamp, a small pump, a motor or a heater. Wiring is three wires - VCC, GND and IN - and the control side is separated from the mains side, but that isolation only holds if the two sides do not share a supply. Power the module from the same 5 V rail as your board and the optocoupler is doing nothing. Three things catch people out. The 10 A figure is the contact rating on paper; feeding an inductive load such as a motor or pump needs heavy derating, the contacts arc and can weld shut after a few operations, so add an RC snubber or flyback diode, and use a solid-state relay for continuous high current. The mains terminals are close together, so keep enough creepage distance at 220 V - they get hot under sustained load. And the trigger logic differs between batches (some are active-high, some active-low), so measure the IN pin before you wire the load. It is convenient for prototypes and demos; for a product, use a bare relay with its own driver instead. Batches and on-board parts vary, so buy from one batch; batch and lead time confirmed on inquiry.

RELAY-1CH-5V — frequently asked questions

Is RELAY-1CH-5V in stock?

Reference availability: 0 pcs, Confirm on inquiry. Stock and lead time are confirmed on inquiry — please contact our sales team for the latest status before ordering.

How much does RELAY-1CH-5V cost?

This part is a backorder item — price and lead time are quoted per order. Send us the quantity you need and sales will reply with price, lead time, MOQ and in-stock alternatives.

What package and brand is RELAY-1CH-5V?

RELAY-1CH-5V is manufactured by Domestic in a Module 43×26mm package, filed under Modules & Dev Boards / Function Modules. RELAY-1CH-5V is a single-channel optocoupler-isolated relay module: 5 V coil, 10 A rated contacts, 43x26 mm board, used to let an MCU or a Raspberry Pi switch a mains load such as a lamp, a small pump, a motor or a heater. Wiring is three wires - VCC, GND and IN - and the control side is separated from the mains side, but that isolation only holds if the two sides do not share a supply. Power the module from the same 5 V rail as your board and the optocoupler is doing nothing. Three things catch people out. The 10 A figure is the contact rating on paper; feeding an inductive load such as a motor or pump needs heavy derating, the contacts arc and can weld shut after a few operations, so add an RC snubber or flyback diode, and use a solid-state relay for continuous high current. The mains terminals are close together, so keep enough creepage distance at 220 V - they get hot under sustained load. And the trigger logic differs between batches (some are active-high, some active-low), so measure the IN pin before you wire the load. It is convenient for prototypes and demos; for a product, use a bare relay with its own driver instead. Batches and on-board parts vary, so buy from one batch; batch and lead time confirmed on inquiry.

What is the minimum order quantity for RELAY-1CH-5V?

The minimum order quantity for RELAY-1CH-5V is 1 pcs. We support small-batch trial runs as well as volume kitting, and can supply full reels, cut tape or loose parts.

Can you suggest an alternative part for RELAY-1CH-5V?

Yes. Send us the original part number or the key parameters (Channel, Contact Rating, RoHS) and we will come back with pin-compatible alternatives and a quotation.

How do I request a quote for RELAY-1CH-5V?

Call or WeChat +86 191 2521 1182, email 19125211182@163.com, or upload your BOM on our BOM sourcing page. We normally respond within two working hours, and a formal full-BOM quotation is normally issued within 24 hours.

Do you ship overseas?

Yes. We are based in Huaqiangbei, Shenzhen and ship worldwide by express courier. Tell us your destination and we will quote shipping with the parts.

Related Function Modules parts

Need RELAY-1CH-5V?

Genuine parts · small-batch trial runs · full BOM kitting

How to order RELAY-1CH-5V

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.