Resistors Resistor Networks · Panasonic

EXB-D10C102J · Resistor Network 1kΩ ±5% ±200ppm/℃ SMD-10P,1.6x3.2mm

EXB-D10C102J (Resistor Network 1kΩ ±5% ±200ppm/℃ SMD-10P,1.6x3.2mm from Panasonic) comes in a SMD-10P,1.6x3.2mm package. Reference unit price: Request quote, minimum order 100 pcs. Availability: Confirm on inquiry. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

EXB-D10C102J Resistor Network 1kΩ ±5% ±200ppm/℃ SMD-10P,1.6x3.2mm
Part numberEXB-D10C102J
ManufacturerPanasonic
DescriptionResistor Network 1kΩ ±5% ±200ppm/℃ SMD-10P,1.6x3.2mm
PackageSMD-10P,1.6x3.2mm
CategoryResistors / Resistor Networks
Reference priceRequest quote
Min. order100 pcs
AvailabilityConfirm on inquiry
Reference stock0 pcs

EXB-D10C102J price and stock (reference)

This part is a backorder item: price and lead time are confirmed per order. Send us an RFQ and sales will reply with unit price, lead time, MOQ and in-stock alternatives.

EXB-D10C102J specifications

Number of Resistors8
Tolerance±5%
Resistance1kΩ
Power(Watts)50mW
Temperature Coefficient±200ppm/℃
Number of Pins10

About the Resistor Network 1kΩ ±5% ±200ppm/℃ SMD-10P,1.6x3.2mm

EXB-D10C102J is Panasonic's Resistor Network 1kΩ ±5% ±200ppm/℃ SMD-10P,1.6x3.2mm. Typical use is bus pull-up or series termination for a group of parallel lines, which saves board space and keeps the channels matched. The circuit type matters as much as the value - isolated, bussed and R-2R networks are not interchangeable. Check the element count, pin-out and tolerance. Availability, batch and lead time are confirmed on inquiry.

Replacement checks:
  • Obtain the manufacturer pin map and identify whether the eight resistors are isolated, bussed or arranged in another network. The same ten-pin count does not prove that the internal circuit is compatible.
  • Check worst-case dissipation against the 50mW per-element rating and determine how many channels may operate at full load together. Bus termination or multi-channel pull-up duty requires a total power and temperature-rise review.
  • Verify the land pattern, pitch and pin-1 orientation for the 1.6×3.2mm body. After substitution, inspect placement shift and solder bridges, then measure resistance and channel position for every element.
Direct answer: EXB-D10C102J is a Panasonic 1kΩ, ±5%, ±200ppm/°C resistor network in an SMD-10P package measuring about 1.6×3.2mm. It is listed with eight resistor elements at 50mW each. Eight elements in ten pins mean the internal termination pattern and pin assignment must be checked; it cannot be treated as interchangeable with a generic eight- or sixteen-pin network. Confirm the circuit topology, footprint and power allocation before ordering. Reviewed 2026-11-20

EXB-D10C102J — frequently asked questions

Is EXB-D10C102J in stock?

Reference availability: 0 pcs, Confirm on inquiry. Stock and lead time are confirmed on inquiry — please contact our sales team for the latest status before ordering.

How much does EXB-D10C102J cost?

This part is a backorder item — price and lead time are quoted per order. Send us the quantity you need and sales will reply with price, lead time, MOQ and in-stock alternatives.

What package and brand is EXB-D10C102J?

EXB-D10C102J is manufactured by Panasonic in a SMD-10P,1.6x3.2mm package, filed under Resistors / Resistor Networks. EXB-D10C102J is Panasonic's Resistor Network 1kΩ ±5% ±200ppm/℃ SMD-10P,1.6x3.2mm. Typical use is bus pull-up or series termination for a group of parallel lines, which saves board space and keeps the channels matched. The circuit type matters as much as the value - isolated, bussed and R-2R networks are not interchangeable. Check the element count, pin-out and tolerance. Availability, batch and lead time are confirmed on inquiry.

What is the minimum order quantity for EXB-D10C102J?

The minimum order quantity for EXB-D10C102J is 100 pcs. We support small-batch trial runs as well as volume kitting, and can supply full reels, cut tape or loose parts.

Can you suggest an alternative part for EXB-D10C102J?

Yes. Send us the original part number or the key parameters (Number of Resistors, Tolerance, Resistance) and we will come back with pin-compatible alternatives and a quotation.

How do I request a quote for EXB-D10C102J?

Call or WeChat +86 191 2521 1182, email 19125211182@163.com, or upload your BOM on our BOM sourcing page. We normally respond within two working hours, and a formal full-BOM quotation is normally issued within 24 hours.

Do you ship overseas?

Yes. We are based in Huaqiangbei, Shenzhen and ship worldwide by express courier. Tell us your destination and we will quote shipping with the parts.

Related Resistor Networks parts

Need EXB-D10C102J?

Genuine parts · small-batch trial runs · full BOM kitting

How to order EXB-D10C102J

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (100 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.