Crystals & Sensors Crystals · Yangxing

X50328MSB2GI · SMD Crystal 8MHz ±10ppm

X50328MSB2GI (SMD Crystal 8MHz ±10ppm from Yangxing) comes in a SMD-5032 package. Reference unit price: US$0.195, minimum order 1 piece. Availability: In stock. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

X50328MSB2GI SMD Crystal 8MHz ±10ppm
Part numberX50328MSB2GI
ManufacturerYangxing
DescriptionSMD Crystal 8MHz ±10ppm
PackageSMD-5032
CategoryCrystals & Sensors / Crystals
Reference priceUS$0.195
Min. order1 pcs
AvailabilityIn stock
Reference stock16,777 pcs

X50328MSB2GI price and stock (reference)

QuantityReference unit priceLead time
1 pcs and upUS$0.195In stock
10 pcs and upUS$0.144In stock
30 pcs and upUS$0.119In stock
100 pcs and upUS$0.109In stock
500 pcs and upUS$0.102In stock
1000 pcs and upUS$0.099In stock

X50328MSB2GI specifications

Frequency8MHz
Tolerance±10ppm
Load Capacitance20pF
Operating Temperature-40–85℃
RoHSCompliant

About the SMD Crystal 8MHz ±10ppm

X50328MSB2GI is an 8 MHz passive SMD crystal from Yangxing in an SMD-5032 package, listed with ±10 ppm tolerance, 20 pF load capacitance and a -40 to 85°C operating range. For an MCU main clock, calculate the external load capacitors from the chip requirements, PCB parasitics and start-up margin, then verify start-up, frequency offset and temperature extremes on a sample board.

The listed data is 8MHz, ±10ppm, 20pF load capacitance, SMD-5032 package and an operating temperature range of -40 to 85°C. The same frequency alone does not make two crystals interchangeable.

Load capacitance describes the equivalent load seen by the oscillator loop, not the marked value of two external capacitors. IC pin capacitance, PCB traces, pads and the crystal pins all contribute, so calculate C1 and C2 from the IC requirements and the actual circuit.

Before replacement, confirm passive crystal versus active oscillator, then compare CL, ESR, drive conditions, tolerance, temperature range and package. A circuit that starts at room temperature is not automatically stable at low temperature or under supply variation; verify startup and frequency where it matters.

Replacement checks:
  • Compare frequency, load capacitance, tolerance, ESR, temperature range and package.
  • Confirm whether the circuit requires a passive crystal or an active oscillator.
  • Calculate external capacitors from the IC requirements, PCB parasitics and startup margin.
  • Test startup and frequency at room temperature, low temperature and reduced supply where relevant.
Direct answer: X50328MSB2GI is an 8MHz passive SMD crystal from Yangxing Technology in a SMD-5032 package. The listed load capacitance is 20pF, tolerance is ±10ppm and operating temperature is -40 to 85°C. For replacement, compare load capacitance, tolerance, ESR, package and the oscillator circuit. Calculate external matching capacitors from the IC requirements, PCB parasitics and startup margin instead of copying 22pF from another board. Reviewed 2026-11-20

X50328MSB2GI — frequently asked questions

What load capacitance does X50328MSB2GI specify?

The listed load capacitance is 20pF. External C1 and C2 are not simply two 20pF capacitors; calculate them from the IC requirements and the actual oscillator circuit.

Can a 20pF crystal always use two 22pF capacitors?

No. 22pF is a common value in some reference designs, but the actual matching network also depends on IC pin capacitance, PCB parasitics and startup margin.

Related Crystals parts

Need X50328MSB2GI?

Genuine parts · small-batch trial runs · full BOM kitting

How to order X50328MSB2GI

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.