Resistors Wirewound Resistor · Ohmite

WNE15RFET · 15 Ohm, 5 W Axial Non-Inductive Wirewound Resistor, ±1%

WNE15RFET (15 Ohm, 5 W Axial Non-Inductive Wirewound Resistor, ±1% from Ohmite) comes in a Axial package. Reference unit price: Request quote, minimum order 100 pcs. Availability: Confirm on inquiry. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

WNE15RFET 15 Ohm, 5 W Axial Non-Inductive Wirewound Resistor, ±1%
Part numberWNE15RFET
ManufacturerOhmite
Description15 Ohm, 5 W Axial Non-Inductive Wirewound Resistor, ±1%
PackageAxial
CategoryResistors / Wirewound Resistor
Reference priceRequest quote
Min. order100 pcs
AvailabilityConfirm on inquiry
Reference stock0 pcs

WNE15RFET price and stock (reference)

This part is a backorder item: price and lead time are confirmed per order. Send us an RFQ and sales will reply with unit price, lead time, MOQ and in-stock alternatives.

WNE15RFET specifications

Resistance15 Ohms
Tolerance±1%
Power Rating5W
CompositionWirewound
FeaturesNon-Inductive
Dielectric±20ppm/°C
Operating Temperature-55°C ~ 150°C
Dimensions0.295" Dia x 0.787" L (7.50mm x 20.00mm)

About the 15 Ohm, 5 W Axial Non-Inductive Wirewound Resistor, ±1%

WNE15RFET is an axial non-inductive wirewound resistor from Ohmite. The listing records 15 ohm, ±1%, 5 W, ±20 ppm/C drift, a -55 to 150 C range and an approximately 7.5 x 20 mm body. It is a higher-resistance power resistor, not a milliohm high-current shunt. At an ideal 5 W, the current is about 0.577 A and the terminal voltage about 8.66 V; ambient, mounting, pulse and long-term drift require derating.

Replacement checks:
  • Confirm whether the design needs a 15 ohm power resistor or a milliohm shunt; sense voltage, dissipation and layout differ completely.
  • Derate the 5 W rating for ambient, mounting and pulse, and verify the non-inductive construction in the exact datasheet.
  • Check ±1% tolerance, ±20 ppm/C drift, long-term stability and the actual measurement points.
  • Verify axial dimensions, lead forming, coating and heat transfer after soldering; do not compare only the 5 W headline.
Direct answer: WNE15RFET is a 15 ohm, 5 W, ±1%, ±20 ppm/C non-inductive axial wirewound resistor with a -55 to 150 C range. It is not a milliohm current shunt. At 5 W the ideal current is only about 0.577 A before thermal and pulse derating, so confirm that the circuit genuinely requires 15 ohm. Reviewed 2026-11-20

WNE15RFET — frequently asked questions

Is WNE15RFET a low-resistance current shunt?

No. It is a 15 ohm, 5 W wirewound resistor. It may be used in a deliberate low-current measurement, but it is not a milliohm high-current shunt.

How much current can WNE15RFET carry at 5 W?

The ideal calculation is about 0.577 A at 8.66 V. Ambient, mounting, pulse and long-term drift require derating, so this is not a continuous operating allowance.

Why does the page call it non-inductive?

The listing records a non-inductive construction. That helps with fast pulse or high-frequency behaviour, but it does not change the thermal, voltage or resistance limits.

Related Wirewound Resistor parts

Need WNE15RFET?

Genuine parts · small-batch trial runs · full BOM kitting

How to order WNE15RFET

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (100 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.