Capacitors Aluminum Electrolytic Capacitors · Nichicon

UUD1H221MNL1GS · 220 µF 50 V SMD Aluminum Electrolytic Capacitor

UUD1H221MNL1GS is a 220 µF, 50 V SMD aluminum electrolytic capacitor from Nichicon in an 8 × 10 mm case. The 5,000-hour at 105°C life and 450 mA ripple rating matter as much as capacitance: observe polarity and compare ESR, ripple heating, footprint and expected service life.

UUD1H221MNL1GS 220 µF 50 V SMD Aluminum Electrolytic Capacitor
Part numberUUD1H221MNL1GS
ManufacturerNichicon
Description220 µF 50 V SMD Aluminum Electrolytic Capacitor
PackageSMD 8×10mm
CategoryCapacitors / Aluminum Electrolytic Capacitors
Reference priceUS$0.323
Min. order20 pcs
AvailabilityIn stock
Reference stock285 pcs

UUD1H221MNL1GS price and stock (reference)

QuantityReference unit priceLead time
1 pcs and upUS$0.323In stock
10 pcs and upUS$0.256In stock
30 pcs and upUS$0.227In stock
100 pcs and upUS$0.191In stock
500 pcs and upUS$0.175In stock

UUD1H221MNL1GS specifications

Capacitance220µF
Tolerance±20%
Voltage Rating50V
Life5000 hours @105℃
Ripple Current450mA
RoHSCompliant

About the 220 µF 50 V SMD Aluminum Electrolytic Capacitor

UUD1H221MNL1GS is a Nichicon 220 uF / 50 V surface-mount aluminum electrolytic capacitor in an 8 x 10 mm case, rated for 5,000 hours at 105 C with a 450 mA ripple-current rating. It is intended for output filtering and higher-voltage supply rails, where capacitance and ripple handling matter. Observe polarity, and check ripple current, ambient temperature and cooling together rather than treating 220 uF as a complete substitute specification. A replacement should match capacitance, voltage, case size, lead spacing, rated life and ripple capability; moving from a low-ESR part to an ordinary type can increase output ripple. Inspect the original label, lot and production date, and do not treat old or pulled stock as new; availability and lead time are subject to quotation.

Replacement checks:
  • Verify that 220 µF and 50 V meet startup, hold-up and transient-load requirements, with voltage margin.
  • Observe polarity and confirm pad orientation and reflow conditions; reverse installation can cause rapid failure.
  • Evaluate ripple heating and service life against the 450 mA rating, ambient temperature and 5,000-hour at 105°C life.
  • Check the 8 × 10 mm SMD case, terminal spacing, ESR requirement and mechanical clearance, not capacitance alone.
Direct answer: UUD1H221MNL1GS is a Nichicon 220 µF, 50 V SMD aluminum electrolytic capacitor listed in an 8 × 10 mm case with 5,000-hour life at 105°C and 450 mA ripple current. It is intended for energy storage and output filtering; replacement checks include polarity, ESR, ripple heating, life, size and PCB pads, not only 220 µF and 50 V. Reviewed 2026-11-20

UUD1H221MNL1GS — frequently asked questions

Does the 5,000-hour rating mean the capacitor only lasts 5,000 hours?

It is a life rating at 105°C. Actual life depends strongly on temperature, ripple current and cooling, so it cannot be equated directly to hours at room temperature.

Can any ordinary 220 µF, 50 V electrolytic replace it?

No. Also compare ESR, ripple-current rating, case size, terminal spacing, life and temperature class. Replacing a low-ESR part with an ordinary type can increase ripple.

How should polarity be confirmed?

Check the exact part marking, datasheet, PCB silkscreen and pad orientation. Marking conventions can differ between manufacturers and case styles.

Related Aluminum Electrolytic Capacitors parts

Need UUD1H221MNL1GS?

Genuine parts · small-batch trial runs · full BOM kitting

How to order UUD1H221MNL1GS

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (20 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.