Capacitors Tantalum Capacitors · KEMET

T491A106K016AT · Tantalum Capacitor 10µF ±10% 16V

T491A106K016AT (Tantalum Capacitor 10µF ±10% 16V from KEMET) comes in a A case 3216 package. Reference unit price: US$0.161, minimum order 20 pcs. Availability: In stock. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

T491A106K016AT Tantalum Capacitor 10µF ±10% 16V
Part numberT491A106K016AT
ManufacturerKEMET
DescriptionTantalum Capacitor 10µF ±10% 16V
PackageA case 3216
CategoryCapacitors / Tantalum Capacitors
Reference priceUS$0.161
Min. order20 pcs
AvailabilityIn stock
Reference stock37,267 pcs

T491A106K016AT price and stock (reference)

QuantityReference unit priceLead time
1 pcs and upUS$0.161In stock
10 pcs and upUS$0.125In stock
30 pcs and upUS$0.107In stock
100 pcs and upUS$0.091In stock
500 pcs and upUS$0.087In stock
1000 pcs and upUS$0.084In stock

T491A106K016AT specifications

Capacitance10µF
Voltage Rating16V
ESR3Ω
RoHSCompliant

About the Tantalum Capacitor 10µF ±10% 16V

T491A106K016AT is KEMET's Tantalum Capacitor 10µF ±10% 16V, A case 3216 package. It gives a small, stable bulk capacitance where an aluminium can is too big, typically at the output of a low-noise regulator or on a dense digital rail. Never run a tantalum close to its rated voltage and never reverse-bias it - a surge can take it short. Verify ESR, case size and derating before substituting. Held in stock in Shenzhen; batch and lead time are confirmed on inquiry.

Replacement checks:
  • Tantalum capacitors are polarized and can fail quickly under reverse or overvoltage stress. Confirm polarity marking from the complete datasheet and keep working-voltage and surge margin.
  • Turn-on inrush, hot-plug events and low-impedance supplies increase surge risk. Check the recommended derating and whether series resistance or current limiting is required; the 16 V rating alone is not a complete design rule.
  • When replacing ceramic or aluminum electrolytic capacitors, compare ESR, ripple, capacitance under operating conditions, footprint and failure mode. A 3 ohm ESR is not acceptable for every rail.
Direct answer: T491A106K016AT is a KEMET 10 uF, 16 V, ±10% tantalum capacitor in an A-case 3216 package. The listed ESR is 3 ohms. It is used for board-level energy storage and supply filtering where space is limited, but it is polarized and requires voltage and surge-margin control. When substituting, verify ESR, ripple rating, DC bias, turn-on surge, derating, footprint and failure mode; it is not a generic drop-in replacement for ceramic or aluminum electrolytic capacitors. Reviewed 2026-11-20

T491A106K016AT — frequently asked questions

Can T491A106K016AT be used on a 5 V rail?

A 5 V DC rail is below the 16 V rating, but suitability still depends on ripple, turn-on surge, ambient temperature and derating rules. The voltage rating alone is not a reliability conclusion.

Can this tantalum capacitor replace a 10 uF ceramic capacitor?

Not directly. Compare ESR, ripple, capacitance versus temperature and DC bias, footprint and failure mode. A ceramic capacitor does not have the same polarity-driven failure risk.

How should polarity be checked?

Use the complete datasheet and the marking on the actual component, then confirm PCB silkscreen and orientation before assembly. Do not infer polarity from a generic package image.

Related Tantalum Capacitors parts

Need T491A106K016AT?

Genuine parts · small-batch trial runs · full BOM kitting

How to order T491A106K016AT

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (20 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.