GPB527D202BB · Panel-Mount Snap-In Pushbutton Switch, SPST, 10 A AC / 20 A DC
GPB527D202BB is a panel-mount snap-in pushbutton, not a PCB tactile switch. The listing shows SPST off-on contacts, a round actuator, 10 A AC at 125 V AC and 20 A DC at 14 V DC. Check the panel cutout and thickness, whether the action is maintained or momentary, the terminals and the real load before use.

| Part number | GPB527D202BB |
| Manufacturer | CW Industries |
| Description | Panel-Mount Snap-In Pushbutton Switch, SPST, 10 A AC / 20 A DC |
| Package | Through-Hole |
| Category | Switches & Relays / Pushbutton Switch |
| Reference price | Request quote |
| Min. order | 1 pcs |
| Availability | Confirm on inquiry |
| Reference stock | 0 pcs |
GPB527D202BB price and stock (reference)
This part is a backorder item: price and lead time are confirmed per order. Send us an RFQ and sales will reply with unit price, lead time, MOQ and in-stock alternatives.
GPB527D202BB specifications
| Mounting Type | Panel Mount, Snap-In |
| Type | Standard |
| Circuit | SPST |
| Switch Function | Off-On |
| Current Rating (Amps) | 10A (AC), 20A (DC) |
| Voltage Rating - AC | 125 V |
| Voltage Rating - DC | 14 V |
| Switch Type | Round, Button |
| Actuator Marking | No Marking |
About the Panel-Mount Snap-In Pushbutton Switch, SPST, 10 A AC / 20 A DC
GPB527D202BB is a CW Industries panel-mount snap-in pushbutton switch. Although the site taxonomy places it under tactile switches, the mechanical data specifies panel mounting, a round actuator and SPST off-on contacts. The listed ratings are 10 A AC at 125 V AC and 20 A DC at 14 V DC. It is not a PCB tactile button, and the 20 A DC figure cannot be extended to 220 V or to a higher DC voltage. The page does not state the panel cutout, snap-in thickness, maintained or momentary action, terminal type or mechanical life, so those details must be confirmed from the exact manufacturer drawing.
- Confirm whether the design needs panel mounting or PCB mounting. This part is panel-mount snap-in, so its terminals and assembly differ from a tactile switch.
- Use the corresponding 125 V AC/10 A or 14 V DC/20 A condition, then verify inrush and derating for inductive, capacitive or lamp loads.
- Obtain the panel cutout, permitted panel thickness, actuator height, terminal style and wire/solder requirements, and trial-fit the assembly.
- Determine whether off-on is maintained or momentary, and confirm mechanical/electrical life, insulation and environmental protection. Items absent from the listing cannot be assumed.
GPB527D202BB — frequently asked questions
No. The mechanical data describes a panel-mount snap-in pushbutton, not a PCB tactile button. The catalog subcategory conflicts with the physical construction, so assembly decisions must follow the mechanical data and manufacturer drawing.
Not directly. The listed 20 A condition is 14 V DC, while the recorded AC rating is 10 A at 125 V AC. Higher DC voltage also changes arc interruption, insulation and safety requirements.
The page lists only off-on and does not distinguish maintained from momentary operation. The exact action and ordering definition must be confirmed with the manufacturer.
Related Pushbutton Switch parts
Genuine parts · small-batch trial runs · full BOM kitting
How to order GPB527D202BB
Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.