EP5WS10RJ · 10 Ohm, 5 W Axial Wirewound Resistor, ±5%
EP5WS10RJ (10 Ohm, 5 W Axial Wirewound Resistor, ±5% from TE Connectivity) comes in a Through Hole package. Reference unit price: Request quote, minimum order 100 pcs. Availability: Confirm on inquiry. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

| Part number | EP5WS10RJ |
| Manufacturer | TE Connectivity |
| Description | 10 Ohm, 5 W Axial Wirewound Resistor, ±5% |
| Package | Through Hole |
| Category | Resistors / Wirewound Resistor |
| Reference price | Request quote |
| Min. order | 100 pcs |
| Availability | Confirm on inquiry |
| Reference stock | 0 pcs |
EP5WS10RJ price and stock (reference)
This part is a backorder item: price and lead time are confirmed per order. Send us an RFQ and sales will reply with unit price, lead time, MOQ and in-stock alternatives.
EP5WS10RJ specifications
| Resistance | 10Ω |
| Power Rating | 5W |
| Type | Wirewound Resistor |
| Temperature Coefficient | ±400ppm/℃ |
| Tolerance | ±5% |
| Operating Temperature | -55℃~+155℃ |
About the 10 Ohm, 5 W Axial Wirewound Resistor, ±5%
EP5WS10RJ is a TE Connectivity axial wirewound resistor listed at 10 ohm, 5 W, ±5%, ±400 ppm/C and -55 to 155 C. At an ideal 5 W, the current is about 0.707 A and the terminal voltage about 7.07 V. The relatively wide drift and higher resistance suit power, limiting, load or special low-current roles, not a precision or milliohm high-current shunt.
- Confirm whether the circuit needs a 10 ohm power resistor or a low-ohm current shunt before comparing part numbers.
- Calculate 5 W operation and derate for the real ambient, mounting, pulse and lead length.
- Check ±5% tolerance and ±400 ppm/C drift against the measurement-error budget.
- Verify lead dimensions, solderability, coating and long-term stability; a similar axial outline is not enough.
EP5WS10RJ — frequently asked questions
No. It is a 10 ohm, 5 W wirewound power resistor with ±5% tolerance and ±400 ppm/C drift. It is not a milliohm precision shunt.
The ideal calculation is about 0.707 A at 7.07 V. Real current must be reduced for ambient, mounting, pulse and long-term drift.
Only after checking construction, pulse capability, drift, dimensions, mounting and long-term stability as well as the resistance.
Related Wirewound Resistor parts
Genuine parts · small-batch trial runs · full BOM kitting
How to order EP5WS10RJ
Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (100 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.