Crystals & Sensors Motion Sensors · ADI

ADXL345 · 3-Axis Accelerometer ±16g

ADXL345 (3-Axis Accelerometer ±16g from ADI) comes in a LGA-14 package. Reference unit price: US$4.51, minimum order 1 piece. Availability: In stock. Shenzhen Kewei Technology Co., Ltd. supplies this part from Huaqiangbei, Shenzhen, with tiered pricing, small-batch support and full BOM kitting. Prices and lead times are confirmed on inquiry.

ADXL345 3-Axis Accelerometer ±16g
Part numberADXL345
ManufacturerADI
Description3-Axis Accelerometer ±16g
PackageLGA-14
CategoryCrystals & Sensors / Motion Sensors
Reference priceUS$4.51
Min. order1 pcs
AvailabilityIn stock
Reference stock292 pcs

ADXL345 price and stock (reference)

QuantityReference unit priceLead time
1 pcs and upUS$4.51In stock
100 pcs and upUS$3.29In stock
1000 pcs and upUS$3.16In stock

ADXL345 specifications

Range±16g
InterfacesI²C/SPI
RoHSCompliant

About the 3-Axis Accelerometer ±16g

ADXL345 is ADI's 3-Axis Accelerometer ±16g, LGA-14 package. Typical use is motion detection, orientation sensing, vibration monitoring and shake or step detection in consumer and industrial products. Confirm axes, range, interface and supply before substituting, and check the package - MEMS packages are sensitive to soldering stress and board flex. Held in stock in Shenzhen; batch and lead time are confirmed on inquiry.

Replacement checks:
  • Confirm that the application needs three-axis linear acceleration, not angular rate. Attitude fusion usually requires a gyroscope as well; ADXL345 is not a substitute for a six-axis MPU6050-type device.
  • Check host supply and I/O levels, I2C address or SPI mode, output data rate, interrupt and FIFO requirements. The same LGA-14 outline does not establish register or pin compatibility.
  • MEMS devices are sensitive to board flex and soldering stress. Keep the package away from mechanical clamping and strong vibration paths, and validate drift and noise in the real assembly.
Direct answer: ADXL345 is an Analog Devices three-axis digital accelerometer. The listed site data shows a ±16g range, I2C/SPI interface and LGA-14 package. It measures three-axis linear acceleration and does not contain a gyroscope, so it is not a six-axis IMU. Before substitution or design-in, verify supply and I/O levels, range, output data rate, FIFO, interrupts, register map, mounting orientation and soldering stress; an LGA-14 outline alone does not prove compatibility. Reviewed 2026-11-20

ADXL345 — frequently asked questions

Can ADXL345 replace MPU6050 directly?

No. ADXL345 is a three-axis accelerometer, while MPU6050 includes both a three-axis accelerometer and a three-axis gyroscope. Axis count, registers, interface and attitude algorithms differ.

Can ADXL345 connect directly to a 5 V MCU?

Do not rely on breakout-board experience. Check device supply, absolute I/O limits and bus voltage. Use level shifting where required and verify pull-up voltages.

Are two parts interchangeable just because both are LGA-14?

No. The package outline only describes the footprint. It does not establish pin definitions, registers, range, FIFO or interrupt behavior.

Related Motion Sensors parts

Need ADXL345?

Genuine parts · small-batch trial runs · full BOM kitting

How to order ADXL345

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.