Switches & Relays Tactile Switches · OMRON

A6H-4101 · 4-Position Recessed Slide DIP Switch

A6H-4101 is a four-position SPST slide DIP switch with a recessed actuator, 1.27 mm pitch, gull-wing SMD terminals and a 24 V, 25 mA rating. It holds a configuration position rather than operating as a momentary pushbutton. Match the actuator height and recess, pin numbering, footprint and cleaning method.

A6H-4101 4-Position Recessed Slide DIP Switch
Part numberA6H-4101
ManufacturerOMRON
Description4-Position Recessed Slide DIP Switch
PackageSMD
CategorySwitches & Relays / Tactile Switches
Reference priceUS$2.76
Min. order1 pcs
AvailabilityIn stock
Reference stock105 pcs

A6H-4101 price and stock (reference)

QuantityReference unit priceLead time
1 pcs and upUS$2.76In stock
10 pcs and upUS$2.40In stock
75 pcs and upUS$2.18In stock
150 pcs and upUS$1.75In stock
300 pcs and upUS$1.75In stock
525 pcs and upUS$1.75In stock
1050 pcs and upUS$1.75In stock
2550 pcs and upUS$1.75In stock

A6H-4101 specifications

Number of Positions4
ColorBlack
Current Rating25mA
CircuitSPST
Lifetime1,000 times
TypeSlide, Recessed
Voltage Rating24V
Termination StyleGull Wing
Lead Pitch1.27mm

About the 4-Position Recessed Slide DIP Switch

A6H-4101 is a four-position recessed slide DIP switch in an SMD package with 1.27 mm terminal pitch. The listing describes four SPST positions, a 24 V, 25 mA rating, 1,000 operating cycles, a recessed actuator and gull-wing terminals. It is a configuration switch that holds the selected position; it is not a momentary tactile pushbutton. Check position count, SPST contact form, recess depth, actuator access, PCB land pattern and cleaning requirements.

Replacement checks:
  • Confirm that the design needs a four-position slide DIP switch that retains a configuration, not a momentary tactile button.
  • Check the SPST contact form, 24 V/25 mA rating, 1,000-cycle life and actual load current.
  • Verify recess depth, tool access, enclosure opening and protection against accidental actuation.
  • Match the 1.27 mm gull-wing terminals, land pattern, pin numbering, orientation and reflow or cleaning process.
Direct answer: A6H-4101 is a four-position recessed slide DIP switch with gull-wing SMD terminals and 1.27 mm pitch. The listing shows SPST contacts, 24 V/25 mA and 1,000 cycles. It holds a configuration position and is not a momentary tactile button; replacement checks include position count, actuator recess, pin numbering, land pattern and cleaning protection. Reviewed 2026-11-20

A6H-4101 — frequently asked questions

Is A6H-4101 a tactile pushbutton?

No. The listing describes a four-position recessed slide DIP switch with SPST contacts; it holds the selected position and does not self-reset like a momentary tactile switch.

Are the four positions four independent contacts?

The listing shows four switch positions, SPST contacts and eight gull-wing terminals. The exact common or independent arrangement must be confirmed from the part data.

Is a 1,000-cycle life sufficient?

It depends on how often the setting changes. DIP switches are usually set once and left in place; frequent actuation requires a different reliability assessment.

Related Tactile Switches parts

Need A6H-4101?

Genuine parts · small-batch trial runs · full BOM kitting

How to order A6H-4101

Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (1 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.

Related pages

About pricing and stock: Prices, quantities and lead times shown on this page are for reference only. Component pricing fluctuates and we carry a very large number of part numbers — please confirm with our sales team for a firm quotation.