352212RFT · 12 Ohm, 3 W Thick-Film Chip Resistor, ±1%, 2512
352212RFT is a 2512 thick-film resistor listed at 12 ohm, 3 W, ±1% and ±200 ppm/C. Its 250 V maximum working voltage is separate from the 3 W dissipation limit, which corresponds to about 0.5 A and 6 V at this resistance. Use it as a power or load resistor after thermal and pulse review, not as a drop-in milliohm shunt.

| Part number | 352212RFT |
| Manufacturer | TE Connectivity |
| Description | 12 Ohm, 3 W Thick-Film Chip Resistor, ±1%, 2512 |
| Package | 2512 |
| Category | Resistors / Thick-Film Resistor |
| Reference price | US$0.885 |
| Min. order | 100 pcs |
| Availability | In stock |
| Reference stock | 33 pcs |
352212RFT price and stock (reference)
| Quantity | Reference unit price | Lead time |
|---|---|---|
| 1 pcs and up | US$0.885 | In stock |
| 10 pcs and up | US$0.732 | In stock |
| 30 pcs and up | US$0.649 | In stock |
352212RFT specifications
| Power Rating | 3W |
| Resistance | 12Ω |
| Voltage Rating | 250V |
| Type | Thick Film Resistor |
| Tolerance | ±1% |
| Temperature Coefficient | ±200ppm/℃ |
| Operating Temperature | -55℃~+155℃ |
About the 12 Ohm, 3 W Thick-Film Chip Resistor, ±1%, 2512
352212RFT is a 2512 thick-film power resistor from TE Connectivity. The listing records 12 ohm, ±1%, 3 W, ±200 ppm/C, a 250 V maximum working voltage and a -55 to 155 C range. Its resistance is not in the milliohm range, so the earlier low-resistance current-shunt label is misleading. At 3 W and 12 ohm, the ideal full-power current is about 0.5 A and the terminal voltage about 6 V. The 250 V maximum working voltage is a separate limit and cannot be reached while simultaneously dissipating 3 W; 250 V across 12 ohm would greatly exceed the power rating. Derate for pulse, ambient and board heat when used as a bleeder, load or general power resistor.
- Confirm the intended 12 ohm voltage, current or bleeder role; do not treat it as a direct replacement for a milliohm sense resistor.
- Check the 3 W power, 250 V maximum working voltage and actual terminal voltage separately. Any one can be exceeded; 250 V is not the operating voltage at 3 W.
- Review pulse energy, repetition rate, ambient and 2512 pad heat transfer, then derate from actual temperature rise rather than a room-temperature headline value.
- Verify ±1% tolerance, ±200 ppm/C drift and long-term stability, along with terminals, footprint and solder stress.
352212RFT — frequently asked questions
No. It is 12 ohm, not 12 milliohm, roughly a thousand times higher. Sense voltage, dissipation and feedback design would all change.
No. The 250 V limit is separate. Applying 250 V to 12 ohm would dissipate far more than 3 W, so power, voltage and temperature limits must all be satisfied.
Not directly. Derate for ambient, pads, copper, nearby heat sources, pulse and permitted temperature rise, then confirm the result with a temperature measurement.
Related Thick-Film Resistor parts
Genuine parts · small-batch trial runs · full BOM kitting
How to order 352212RFT
Send the quantity and the destination country; sales normally responds within two working hours with the unit price, date code, MOQ (100 pcs) and shipping cost. A formal full-BOM quotation normally follows within 24 hours. Shipping is quoted together with the parts.